Specifying SVM settings

At this step, the Hypervisor column shows the IP address in IPv4 format or the fully qualified domain name (FQDN) of the hypervisor on which the SVM will be deployed. Specify the following SVM settings for each hypervisor:

• SVM name
  

  Fully qualified domain name (FQDN) of the SVM.

• Storage
  

  Hypervisor data storage for SVM image.

  The drop-down list displays the storage repositories available for SVM deployment.

  If you are deploying SVMs on a Microsoft Windows Server (Hyper-V) hypervisor that is part of a cluster, only shared repositories can be selected in the list.

  If you are deploying SVMs on a Microsoft Windows Server (Hyper-V) hypervisor that is not part of a cluster, you can manually enter the path to the repository.

• Network name
  

  The name of the virtual network that the SVM must use to connect to other virtual machines and Kaspersky Security Center Administration Server.

  You can specify one or more virtual networks available on the hypervisor. To add or remove a field for selecting virtual networks, use the buttons next to the network selection field.

  If the virtual infrastructure uses the VMware Distributed Virtual Switch component, you can specify a Distributed Virtual Port Group to which the SVM will be connected.

  If you intend to use dynamic IP addressing (DHCP) for all SVMs, the network settings will be received from the DHCP server via the first virtual network in the list of networks specified for each SVM. Make sure that the Wizard can connect to the SVM with the network settings of the first virtual network received from the DHCP server.

• VLAN ID
  

  The ID of a virtual local area network (VLAN) used by the SVM to connect to virtual machines and the Kaspersky Security Center Administration Server.

  If a virtual local area network is not used, the column shows No.

  This column is displayed only if the SVM is deployed on a Microsoft Windows Server (Hyper-V) hypervisor.

Go to the next step in the wizard.

Page top