Configuring SVM network settings

At this step, configure the network settings of the SVM. To do so, perform one of the following:

• Select the Dynamic IP addressing (DHCP) option if you want to use the network settings received over the DHCP protocol for all SVMs.

  By default, the IP address of the DNS server and the IP address of the alternative DNS server received over the DHCP protocol are used for each SVM. If you specified several virtual networks for the SVM at the previous step, by default the network settings for the SVM are received from the DHCP server of the first virtual network in the list of the specified virtual networks.

  If you want to manually specify the IP address of the DNS server and alternative DNS server, clear the Use list of DNS servers received via DHCP check box. This opens a table containing the following information:

  • Hypervisor
    

    IP address in IPv4 format or the fully qualified domain name (FQDN) of the hypervisor on which the SVM will be deployed.

  • SVM name
    

    Fully qualified domain name (FQDN) of the SVM.

  Specify the IP addresses of DNS servers in the DNS server and Alternative DNS server table columns.

• Select the Static IP addressing option if you want to manually assign all SVM network settings. This opens a table containing the following information:
  • Hypervisor
  • SVM name
  • Network name
    

    The name of the virtual network that the SVM must use to connect to other virtual machines and Kaspersky Security Center Administration Server.

  Specify the following network settings for each SVM:

  • IP address of the SVM
  • Subnet mask
  • Gateway
  • DNS
  • Alternative DNS

  If you specified several virtual networks for the SVM at the previous step, specify the network settings for each virtual network.

Go to the next step in the wizard.

Page top